Why is air source heat pump so popular in domestic and foreign markets?

Classification of air source heat pumps: According to the different medium that obtains heat, air source heat pumps can be divided into air/air heat pumps and air/water heat pumps. Air/air heat pumps, the difference between the two is that the heat of the unit does not produce the same results as the material. Air heat pump directly uses heat for heating, water heat pump uses heat to make hot water, and the hot water after use is transported through the end pipe for room heating.

Working principle: Air source heat pump mainly absorbs heat from air, water and other nature, and drives the fan to drive the room, so that the air passes through the evaporator of the heat pump, that is, the heat collection device installed in the outdoor to obtain the heat in the outdoor air. The heat in the evaporator is made into hot water or hot air through the condenser to improve the use of domestic hot water and heating.

Innovation advantage: At present, the use of collective heating in China's buildings often causes a lot of energy pollution and waste. For the development of ultra-low energy consumption buildings, it is sought to cancel the central heating mode and use small air source heat pumps to supplement heat and meet heating needs. Traditional split air conditioners mainly meet the cooling needs in summer. Although the winter heating performance has been developed, the heating air conditioner will discharge waste water and exhaust gas, and the unit can not operate efficiently in a low temperature environment, resulting in energy waste and increased unit maintenance costs. Air source heat pumps are used for heating and can consume 1/3 of the electrical energy efficiency of electric heating. Moreover, the air source heat pump is mainly used for heating, and the ambient temperature adaptability and system efficiency are better.

Operation efficiency: Air source heat pump has adopted new compressor technology, frequency conversion technology and new system forms under the research of industry insiders for many years. Compared with ordinary heating and air conditioning products, its heating efficiency is good, the low temperature environment heating capacity is increased by 50% to 100%, and the energy efficiency is increased by about 20%. And in order to meet the heating needs of northern China, the air source heat pump has achieved outdoor heating in a low temperature environment of -30℃.


Special design: The modular air source heat pump is better, the intelligent program service embedded in the unit, and the unit heating mode is "full time and full space". Through the remote monitoring unit, the heating control of some rooms can be realized at any time, saving energy and improving efficiency.